AAE Arrow Straightener

The AAE Arrow Straightener combines a rugged, hard-anodized aluminum frame with a precision dial indicator and adjustable bearing supports. It helps archers identify shaft bends, make controlled straightening adjustments and check nock alignment at the workbench.

• Precision measurement: The jeweled dial indicator reads in 0.0005-inch increments to show small changes in shaft straightness as the arrow rotates.
• Adjustable bearing supports: Position the bearings for different sections of the shaft, including bends near the nock or point. AAE specifies that the bearings can be brought within 2 inches of each other, allowing work within approximately 3/4 inch of either end.
• Delrin straightening pad: The contact pad is designed to avoid marking or denting the shaft during adjustment.
• Nock alignment checks: Spin a straight arrow on the bearings to check for visible nock wobble.
• Size range: AAE specifies shaft sizes 14 through 24 without additional wedges or accessories.

Some assembly and initial alignment are required. Make small, controlled adjustments and follow AAE's setup and operating instructions.

View AAE assembly and operating instructions (PDF).